-
More is less
A survey company can stockpile a few dozen nodes, grab however many they need based on a survey’s parameters, connect them and “go.” The nodes are identical and interchangeable. Instead of humans micro- managing sensor relationships, they figure it out independently. One of the sensors takes charge, coordinates data from the network and sends it to the humans topside. If you add another sensor, the sensor in charge recognizes and integrates the new sensor. Less downtime can lower on-vessel equipment setup from half a day to half an hour. -
Crush Survey Ops Costs
The network array weighs a fraction of the payload of comparable systems, creating cascading returns:- Requires a smaller, less expensive vessel
- Survey in shallower water
- Survey in rougher weather = Less downtime
- Less payload to lift off the deck = Safer to crew and lower risk of damaging expensive boat machinery
-
Scale up to 30
Right size your network up to 30 nodes based on a survey parameters. -
Time-Synced Precision
The consequences of poor time synchronization range from bad data to useless data. Synapse keeps its nodes synchronized to within microseconds. Automatically. -
Higher Definition
Get sharper data with faster sampling rates and tighter survey tracks with more compact mags. -
Ultralight
Our smaller sensors can reduce an array’s size and weight by a factor of 4-5. -
Firmware Updater Tool
Update the transceiver firmware yourself to capitalize on our newest feature releases and critical updates. -
Get BOB Survey Software
Easily plan, configure, execute, and analyze your survey – free and native for all our magnetometers.
Learn more -
Call Us
To discuss whether Synapse is the perfect fit for your application, contact Gina Lopez: +1 (619) 655-0179 or gina.lopez@marinemagnetics.com
The Synapse comes with:
Synapse Includes
- Any combination of sensors: Scalar Magnetometer, Pressure, Altimeter, and Tilt IMU
- Network Status LED
- Leak Detector
| Performance | |
|---|---|
| Operating Zones | Worldwide. |
| Absolute Accuracy | TBD |
| Sensor Sensitivity | 0.01 nT (10 pT/ rt-Hz) |
| Resolution | 0.001 nT |
| Dead Zone | 1 Zone (+\- 6 degrees from center) Sensor can be easily rotated for worldwide operation |
| Sampling Rate | Up to 20hz |
| Sensor Type | Scalar (Rubidium optically-pumped) |
| Power Consumption | 4.5 W per node 7 W with altimeter and IMU |
| Range | 18,000 nT to 120,000 nT |
| Gradient Tolerance | Over 10,000 nT/m |
| Depth Rating | 1000m (1420 psi) |
| Interface | USB or RS232 |
| Power Supply | 24 VDC (120-240 VAC compatible) (Acceptable range 9-30 VDC) |
| Magnetometer | |
|---|---|
| Length | 86 cm (33.75 in) 94 cm (37 in) with altimeter |
| Diameter | 7.6 cm (3 in) |
| Weight in Air | 3.5 kg (7.7 lbs) 4.7 kg (10.3 lbs) with altimeter |
| Weight in Water | Neutral |
| Accessory Tow-fish (Optional) | |
|---|---|
| Sensors | Pressure-depth, Echosounder-altitude, and Tilt Inertial Measurement Unit (IMU) |
| Length | 43 cm (17 in) |
| Diameter | 7.6cm (3 in) |
| Weight in Air | 2.4 kg (5.5 lbs) |
| Weight in Water | Neutral |
Side Scan Integration
Integrations for SeaSPY2, SeaQuest2, Explorer and Synapse.
AUV Towed Integration
Using high sensitivity technology for unmatched accuracy, low noise and power, our products are ideal to integrate with AUVs.